HP XP20000/XP24000 Manual page 18

Table 2 Error Codes — Part Code 0002 (continued)
Part Error
Code Number
0002 56525
0002 56526
0002 58578
0002 66100
Table 3 Error Codes — Part Code 0003
Part Error
Code Number
0003 1003
0003 1004
0003 1009
0003 1010
18 Remote Web Console for Storage System Messages and Error Codes
Error Message
Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
The resources of other SLPR(s)
cannot be accessed.
An error occurred in the
storage system. The
configuration may be
inconsistent. Select [All
Refresh] and refresh the
configuration.
The Login could not be
performed because a function
failed to start during SVP
initialization.
Call HP technical support.
Error Message
You are trying to set multiple
paths to the same volume
from one group.
Multiple volumes are
specified to a single port,
group or LUN combination.
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
To continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Correct the settings, and then
retry the operation.
Click [All Refresh] and refresh
the configuration.
Call HP technical support.
Recommended Action
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The configuration information
has been changed already.
Check the settings, and
request the setting of the
configuration information
again.
The configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
If this problem persists, call
HP technical support.
Severity Failure
Level Level
E 3
E 6
E 2
E 3
Severity Failure
Level Level
E 6
E 6
E 6
E 2