HP XP20000/XP24000 Manual page 342

Table 58 Error Codes — Part Code 6610 (continued)
Part Error
Code Number
6610 69019
6610 69021
6610 69084
Table 59 Error Codes — Part Code 6805
Part Error
Code Number
6805 5099
6805 6012
6805 6023
6805 7060
6805 71 1 1
6805 7310
6805 8001
6805 81 10
6805 8310
342 Remote Web Console for Storage System Messages and Error Codes
Error Message
The number of data volumes
exceeds the maximum.
Journal groups cannot be
added to the extended
consistency group (EXCTG),
because the number of
EXCTG exceeds the
maximum.
Do you want to release the
remote command device from
the mirror?
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The SVP is busy. Please wait
for a while, and then retry the
operation.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This error code is not
registered.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
The configuration could not
be changed.
The subsystem status is
invalid. Call HP technical
support.
Recommended Action
Reduce the number of data
volumes and retry the
operation. When the number
of volume pairs has already
reaches the maximum value,
you cannot create volume
pairs any further.
Check the number of
registered EXCTG.
To continue the operation,
click [OK].
Otherwise, click [Cancel].
Recommended Action
If the same problem persists
despite retrying, call HP
technical support.
If the problem persists despite
retrying, call HP technical
support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If the error occurs after
retrying, call HP technical
support.
If the error occurs after
retrying, call HP technical
support.
Retry the operation. If the
same problem persists despite
retrying, call HP technical
support.
Call HP technical support.
Retry the same operation
several times. If this problem
persists, call HP technical
support.
Severity Failure
Level Level
W 0
W 0
i 0
Severity Failure
Level Level
E 2
E 3
W 3
E 2
E 2
E 0
E 3
E 3
E 2