HP XP20000/XP24000 Manual page 205

Table 45 Error Codes — Part Code 5205 (continued)
Part Error Error Message
Code Number
5205 55598 The specified volume is used
as a Delta resync volume for
XP Continuous Access Journal
or Universal Replicator for
Mainframe.
5205 55599 The volume specified as a
migration target is used as a
volume of Delta resync for XP
Continuous Access Journal or
Universal Replicator for
Mainframe.
5205 55600 The specified volume is used
as a volume of Delta resync
for XP Continuous Access
Journal or Universal
Replicator for Mainframe.
5205 55646 Migration between external
volumes with different cache
modes is invalid.
5205 56301 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5205 56302 An error occurred during SVP
processing. If this problem
persists, call the Support
Center
5205 56303 An error occurred during SVP
processing. If this problem
persists, call the Support
Center
5205 56524 This function cannot be used
by the storage partition
administrator.
5205 56525 Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
5205 56526 The resources of other SLPR(s)
cannot be accessed.
Recommended Action
Check the setting of the
specified volume.
The volume of Delta resync
cannot be specified as a
migration target. See the
notes in the Interoperability
with Other Products section
in the HP StorageWorks
XP24000/XP20000 Auto
LUN Software User's Guide.
The volume of Delta resync
cannot be specified as a
migration target. See the
notes in the Interoperability
with Other Products section
in the HP StorageWorks
XP24000/XP20000 Auto
LUN Software User's Guide.
Specify the volumes with the
same cache mode.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
To continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Correct the settings, and then
retry the operation.
Remote Web Console Error Codes 205
Severity Failure
Level Level
E 6
E 6
E 6
E 6
E 2
E 2
E 2
E 3
E 3
E 6