HP XP20000/XP24000 Manual page 33

Table 3 Error Codes — Part Code 0003 (continued)
Part Error Error Message
Code Number
0003 2045 The current Cache Residency
setting cannot be changed
because the prestaging
operation is in progress.
Please wait for a while, and
then retry the operation.
0003 2080 Prestaging not completed.
0003 2081 An error occurred during a
VLL operation to add or
delete customized volumes.
Wait for a while, and then
retry the operation.
0003 2082 Processing is disabled
because the host is mounted
or the device is reserved.
0003 2083 The subsystem status is
invalid. Call HP technical
support.
0003 2084 The subsystem status is
invalid. Call HP technical
support.
0003 2085 Copying is in progress for XP
Continuous Access, Business
Copy, ShadowImage for
Mainframe, Auto LUN,
Compatible FlashCopy(R) or
Flex Copy XP pairs. Please
wait for a while, and then
retry the operation.
0003 2086 The configuration of XP
Continuous Access, Business
Copy, ShadowImage for
Mainframe, Auto LUN,
Compatible FlashCopy(R), or
XP Snapshot has been
defined. Reset the
configuration definition, and
then retry the operation.
Recommended Action
Wait a few seconds, and
then retry the operation.
Wait a few seconds, and
click [Refresh], and then
change the same
configuration again. Or
check the DKC status (if it is
not blocked). If the same
error occurs, call HP technical
support.
If this problem persists, call
HP technical support.
To perform a VLL operation
on an external volume, check
the status of the path to the
external volume.
The host is mounted or the
device is reserved. Unmount
the host and cancel
reservation of the device. If
the host is an AIX host,
unmount the host, and
execute the varyoffvg
command.
Check the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
Check the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
Wait a few seconds, and
then retry.
Reset the configuration
definition of XP Continuous
Access, XP Business Copy,
ShadowImage for
Mainframe, XP Auto LUN,
FlashCopy Mirroring, or XP
Snapshot, and then retry the
operation.
Remote Web Console Error Codes
Severity Failure
Level Level
W 6
E 6
E 6
E 6
E 2
E 2
W 6
W 6
33