HP XP20000/XP24000 Manual page 349

Table 61 Error Codes — Part Code 7005 (continued)
Part Error Error Message
Code Number
7005 8533 The command has been
rejected, because the
emulation type of the
specified volume is not
supported or the specified
S-VOL is used as a data
volume of XP Continuous
Access Journal.
7005 8535 A processor failure was
detected.
7005 8536 A cache failure was detected.
7005 8537 The cache capacities do not
match.
7005 8538 An SM failure was detected.
7005 8539 There is insufficient shared
memory to create 4096
pairs.
7005 8540 There is sufficient shared
memory to create 4096
pairs, but initial subsystem
setup is required before
creating pairs.
7005 8541 There is sufficient shared
memory to create 4096
pairs, and the initial
subsystem setup is complete.
7005 8542 Failed to complete the initial
shared memory setup.
7005 8543 The shared memory size is
different.
7005 8544 16 Mbytes of shared memory
is available.
7005 8545 A power supply failure is
detected.
7005 8546 The command was rejected.
The PS OFF is in progress.
7005 8547 A data transfer failure is
detected (CHA).
7005 8548 A data transfer failure is
detected (DKA).
Recommended Action
Specify the volume of the
supported emulation type.
When the S-VOL is used as a
data volume of XP Continuous
Access Journal, the command
cannot be executed in the
current status of XP
Continuous Access Journal
pair. See the Interoperability
with Other Products and
Functions section in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the status of XP Continuous
Access Journal pair and the
XP Business Copy operations.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
There is insufficient shared
memory in DKC. Call HP
technical support.
Call HP technical support.
Close the message box.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Retry the operation with
power ON.
Call HP technical support.
Call HP technical support.
Remote Web Console Error Codes 349
Severity Failure
Level Level
W 5
E 0
E 0
E 0
E 0
E 0
E 0
i 0
E 0
E 0
i 0
E 0
i 0
E 0
E 0