HP XP20000/XP24000 Manual page 382

Table 64 Error Codes — Part Code 7105 (continued)
Part Error
Code Number
7105 56303
7105 56524
7105 57101
7105 58000
7105 58001
7105 58002
7105 58003
7105 58004
7105 58259
382 Remote Web Console for Storage System Messages and Error Codes
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This function cannot be used
by the storage partition
administrator.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The command has been
rejected because the cascade
request for creating cascade
pairs composed of volumes
belonging to the same
consistency group was
issued.
The Add Pair command for
adding the L2 pair has been
rejected because the L1 pair
is in V-Split status.
The Quick Restore command
has been rejected because
the specified pair is
composed of a normal
volume and a customized
volume (CV).
The command has been
rejected because a XP
Continuous Access pair exists
in the same subsystem frame.
The command has been
rejected because the issued
request is an operation that
cannot be performed with a
volume that can be used from
either the mainframe or
open-system hosts.
The Quick Restore command
has been rejected, because
the specified pair contains
internal and external volumes,
and also is used as a XP
Continuous Access pair.
Recommended Action
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
If this problem persists, call
HP technical support.
Select a different volume or
release the consistency group
setting.
Wait until the L1 pair status
changes to Split, and then
retry the operation.
Quick restore operation
cannot be performed when
the pair is composed of a
normal volume and a
customized volume (CV).
Select a different pair.
To continue the operation,
delete the XP Continuous
Access pair.
The requested operation
cannot be performed. Check
the status of the specified
volume.
Delete the XP Continuous
Access pair or execute the
operation by other pairs.
Severity Failure
Level Level
E 2
E 3
E 2
i 0
i 0
i 0
i 0
i 0
i 0