HP XP20000/XP24000 Manual page 404

Table 67 Error Codes — Part Code 8105 (continued)
Part Error
Code Number
8105 1356
8105 1357
8105 1362
8105 1364
8105 1369
8105 1600
8105 1601
8105 1904
8105 1905
8105 1906
8105 1910
8105 191 1
404 Remote Web Console for Storage System Messages and Error Codes
Error Message
The host group cannot be
added to the Initiator port.
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a fatal
damage to the S-VOLs. Stop
this operation. To continue
this operation, remove the
S-VOLs from the RCU port
first.
The LUSE volume cannot be
configured because the
external volumes do not have
the same cache mode.
The port type is incorrect.
The specified host mode
option can be set only for a
specific port attribute.
This functionality is not
available. LUN Manager is
required.
This functionality is not
available. Open Volume
Management is required.
The specified volume cannot
be assigned as a LUSE
volume or a command
device, and the path of the
volume cannot be set
because it is being used as a
Pool volume.
There are virtual volumes and
non-virtual volumes in the
volumes specified to compose
a LUSE volume.
The specified volume cannot
be set as a command device
because it is being used as a
V-VOL for XP Snapshot.
The specified volume contains
XP Snapshot pairs.
The specified volume contains
Pool-VOLs.
Recommended Action
The port you are trying to set
is for XP Continuous Access.
You must change the attribute
(Target or RCU Target) when
adding a host group.
The specified Port is for Fibre
XP Continuous Access. Delete
a logical path, and then retry
the operation.
Check the attributes of the
external volumes, and then
retry the operation.
Check the port type, and then
retry the operation.
Check the setting of the host
mode option.
Install the necessary program
product. When an SLPR is
allocated, install a necessary
program product for the
SLPR.
Install the necessary program
product. When an SLPR is
allocated, install a necessary
program product for the
SLPR.
Select another volume.
Select another volume.
Select another volume.
Select another volume.
Select another volume.
Severity Failure
Level Level
E 6
E 6
E 6
W 5
W 3
E 6
E 6
E 6
E 6
E 6
E 6
E 6