HP XP20000/XP24000 Manual page 124

Table 28 Error Codes — Part Code 1 1 10 (continued)
Part Error
Code Number
1 1 10 59336
1 1 10 65751
1 1 10 65752
Table 29 Error Codes — Part Code 1205
Part Error
Code Number
1205 6012
1205 7310
1205 8001
1205 8966
1205 56298
1205 56300
1205 56526
1205 57099
1205 57100
124 Remote Web Console for Storage System Messages and Error Codes
Error Message
The host is to be moved. Do
you want to continue?
You cannot use the following
characters for the UUID: \ /
, : ; * " < > | You cannot use
spaces for the first and the
last characters in the UUID.
The range of the numerical
values that can be set to
UUID is 1 to 32,767 and a
blank.
Error Message
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This error code is not
registered.
A communication time-out
error occurred.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
The SVP is busy. Wait for a
while, and then retry the
operation.
The SVP is busy. Please wait
for a while, and then retry the
operation.
The resources of other SLPR(s)
cannot be accessed.
The request includes an
unexpected parameter.
An internal logic error is
detected in the specified
request.
Recommended Action
To continue processing, click
[OK]. To stop processing,
click [Cancel].
Remove the prohibited
characters from the UUID.
Check the content of the
operation.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Retry the operation. If the
problem persists, reboot the
computer. If necessary, Call
HP technical support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
Reboot the SVP computer and
retry the request. If this
problem persists, call HP
technical support. (Obtain
trace information by using the
FD Dump tool.)
Reboot the SVP computer and
retry the request. If the
problem still persists, call HP
technical support. (Obtain
trace information by using the
FD Dump tool.)
Correct the settings, and then
retry the operation.
Check the settings. If this
problem persists, call HP
technical support. (Obtain
trace information by using the
FD Dump tool.)
Call HP technical support.
(Obtain trace information by
using the FD Dump tool.)
Severity Failure
Level Level
W 5
W 5
W 5
Severity Failure
Level Level
E 3
W 0
E 3
E 3
W 5
W 3
E 6
E 3
E 2