HP XP20000/XP24000 Manual page 153

Table 35 Error Codes — Part Code 3010 (continued)
Part Error Error Message
Code Number
3010 5058 Volume Initialize cannot be
performed because the
number of volumes that can
be created in the parity
group is exceeded.
3010 5060 The setting capacity in the VLL
operation is outside the
setting range. Set the
capacity within the specified
range.
3010 5061 Set the number of cylinders
used for VLL operation to 50
cylinders or more.
3010 5062 LDEV Creation failed because
the specified capacity was
invalid.
3010 5063 The LDEV capacity is not
specified.
3010 5064 LDEV capacity is not
specified.
3010 5065 The number of LDEVs is not
specified.
3010 5066 The specified size or number
is invalid.
3010 5870 No write data is entered in
the [Define] text box.
3010 5871 The number of entered
characters is odd. Enter even
number of characters.
3010 5872 The number of times of
writing cannot be set larger
than 8.
3010 5873 Last data cannot be deleted.
3010 7060 An error occurred in the client
logic.
3010 7440 An error occurred regarding
screen display. Log off from
Remote Web Console. After
that, log on to Remote Web
Console again and check
whether configuration
changes have been made
correctly.
Recommended Action
Reduce the number of
volumes in the parity group,
and then retry.
Enter the correct value.
Enter the correct value.
Enter the correct value.
Do not contain LUSE at the
time of more than one choice.
Specify LDEV capacity
correctly.
Specify the number of LDEVs
correctly.
Check the content of the
operation.
Check the content of the
operation.
Check the content of the
operation.
Check the content of the
operation.
Check the content of the
operation.
Call HP technical support.
Log off from Remote Web
Console. Then log on to
Remote Web Console again
and check the whether
configuration changes have
been made correctly.
If the configuration changes
have been made correctly,
there is no problem.
If the configuration changes
have been made incorrectly,
retry the operation.
Remote Web Console Error Codes 153
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5
W 5
E 5
E 5
E 5
E 5
E 5
E 2
E 2