HP XP20000/XP24000 Manual page 361

Table 61 Error Codes — Part Code 7005 (continued)
Part Error Error Message
Code Number
7005 58480 The operation cannot be
performed, because the
specified S-VOL is a V-VOL
for XP Snapshot.
7005 58481 The operation cannot be
performed, because the
specified S-VOL is a pool
volume.
7005 58482 The operation cannot be
performed, because the
specified reserved volume is
a P-VOL for XP Snapshot.
7005 58483 The operation cannot be
performed, because the
specified reserved volume is
a V-VOL for XP Snapshot.
7005 58484 The operation cannot be
performed, because the
specified reserved volume is
a pool volume.
7005 58492 The Pairsplit-S operation has
failed. Check the
configuration.
7005 58493 The PCB required for this
operation is not mounted.
Check the subsystem
configuration.
7005 58520 The operation failed, because
different versions of
microprograms coexisted in
the storage system.
7005 58533 The operation failed, because
the specified P-VOL was a
journal volume.
7005 58534 The operation failed, because
the specified S-VOL was a
journal volume.
7005 58535 The reserve volume setting
failed because the specified
volume was a journal volume.
7005 58536 The operation failed because
the specified S-VOL was a
data volume of XP Continuous
Access Journal. Check the
requirements for using the
volume with XP Continuous
Access Journal.
7005 58572 An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
Recommended Action
Specify another volume.
Release the pool volume or
select another volume.
Release the XP Snapshot pair,
or select another volume.
Specify another volume.
Release the pool volume, or
select another volume.
Refresh the window, and
check whether the pair exists.
Mount the required PCB, and
then retry the operation.
Replace the microcode, and
then retry the operation.
Release the journal volume
setting, or specify another
volume.
Release the journal volume
setting, or specify another
volume.
Release the journal volume
setting, or specify another
volume.
Check the requirements for
using the volume with XP
Continuous Access Journal.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
Remote Web Console Error Codes 361
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5
E 5
E 2
W 2
W 2
W 2
W 5
E 3