HP XP20000/XP24000 Manual page 329

Table 56 Error Codes — Part Code 6510 (continued)
Part Error Error Message
Code Number
6510 59329 The serial number of the local
DKC is entered. Select the
check box when you add the
journal group of the local
DKC to the extended
consistency group (EXCTG).
6510 59330 The local DKC cannot be
specified for the extended
consistency group (EXCTG).
Delete other DKC to use the
journal group of the local
DKC.
6510 59331 A LUSE volume is included in
the specified volumes.
The current version of the
microprogram does not allow
you to create pairs using
LUSE volumes.
6510 59335 The value of the path watch
time is not entered or is
outside the range. Check the
value of the path watch time.
6510 65664 The specified volume is not
valid for this program
product. Specify another
volume.
6510 65665 The specified volume is not
the volume to be monitored.
Check the monitoring setting.
6510 65777 The current microcode
version of DKCMAIN cannot
assign remote command
devices to mirrors.
6510 65778 No more remote command
devices can be assigned to
the specified mirror.
6510 65779 There are no mirrors
available to assign a remote
command device.
6510 65780 The same mirror ID is
specified in the mirror 1 and
the mirror 2 parameters.
6510 65805 The current microprogram
version of DKCMAIN does
not support creating a pair
by selecting primary or
secondary data volume.
Recommended Action
Check the check box when
you add the journal group of
the local DKC to the extended
consistency group (EXCTG).
Delete other DKC to use the
journal group of the local
DKC.
Check whether the specified
volume is a LUSE volume.
Also, check the version of the
microcode of the storage
system.
Check the value of the path
watch time.
Specify another volume.
Check the monitoring setting.
The microcode versions
between the DKCMAIN and
the SVP might not match.
Confirm the microcode
versions of the DKCMAIN
and the SVP.
Check if a remote command
device was assigned to the
specified mirror.
Check whether the specified
journal groups include
mirrors available to assign a
remote command device.
Specify different mirror IDs in
the mirror 1 and the mirror 2
parameters.
The microprogram versions
between the DKCMAIN and
the SVP might not match.
Verify each microprogram
version.
Remote Web Console Error Codes 329
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 5