Al_Pa Performance Monitor-Class Threshold Defaults; End-To-End Performance Monitor-Class Threshold Defaults - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Table 27
class.
Table 27: AL_PA Performance Monitor-Class Threshold Defaults
Area
Alpa invalid
CRCS
Table 28
Monitor class.
Table 28: End-to-End Performance Monitor-Class Threshold Defaults
Area
End-to-End invalid
CRCS
End-to-End receive
performance
End-to-End
transmit
performance
Fabric Watch Version 3.1.x/4.1.x User Guide
provides default settings for areas in the AL_PA Performance Monitor
Description
Monitors the Unit: Error(s)
number of CRC Time Base: minute
errors Low: 0
High: 60
Buffer: 0
provides default settings for areas in the End-to-End Performance
Description
Monitors the Unit: Errors
number of CRC Time Base: minute
errors Low: 1
High: 10
Buffer: 0
Monitors receive Unit: KB/s
rate in Kbytes per Time Base:
second Low: 0
High: 0
Buffer: 0
Monitors transmit Unit: KB/s
rate in Kbytes per Time Base:
second Low: 0
High: 0
Buffer: 0
Default Threshold
Settings
Default Threshold
Settings
Default Threshold Values
Default Alarm Threshold
Settings
Changed: 0 Informative
Exceeded: 0 Informative
Below: 0 Informative
Above: 0 Informative
In-between: 0 Informative
Default
Alarm Threshold
Settings
Changed: 0 Informative
Exceeded: 0 Informative
Below: 0 Informative
Above: 0 Informative
In-between: 0 Informative
Changed: 0 Informative
Exceeded: 0 Informative
Below: 0 Informative
Above: 0 Informative
In-between: 0 Informative
Changed: 0 Informative
Exceeded: 0 Informative
Below: 0 Informative
Above: 0 Informative
In-between: 0 Informative
State
State
207