HP StorageWorks MSA 2/8 - SAN Switch User Manual page 165

Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Fabric Watch Version 3.1.x/4.1.x User Guide
Explains that the LED state of port # is disabled.
Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference
Guide for information on the switchStatusPolicySet command.
Warning FW-STAUTS_SFP, 3, SFP@Port # is missing
Explains that the LED state of port # is missing.
Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference
Guide for information on the switchStatusPolicySet command.
Warning FW-STAUTS_SFP, 3, SFP@Port # is present
Explains that the LED state of port # is present.
Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference
Guide for information on the switchStatusPolicySet command.
Warning FW-STATUS_SWITCH, 3, Switch status changed from
HEALTHY/OK to Marginal/Warning <reason>
Explains that switch status has changed from healthy to marginal. The
<reason> field describes why the status changed.
Enter the switchstatusshow command to determine the cause of the
error and to troubleshoot the problem.
Warning FW-STATUS_SWITCH, 3, Switch status changed from
HEALTHY/OK to Down/Failed <reason>
Explains that switch status has changed from healthy to down/failed. The
<reason> field describes why the status changed.
Enter the switchstatusshow command to determine the cause of the
error and to troubleshoot the problem.
Warning FW-STATUS_SWITCH, 3, Switch status changed from
Marginal/Warning to HEALTHY/OK .<reason>
Explains that switch status has changed from marginal to healthy. The
<reason> field describes why the status changed.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
Responding to Fabric Watch Messages
165