Best Practices - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Using Fabric Watch with Telnet
1 : change behavior type
2 : change behavior interval
3 : change threshold boundary level
4 : change custom unit
5 : change custom time base
6 : change custom low
7 : change custom high
8 : change custom buffer
9 : apply threshold boundary changes 19 : return to previous page
10 : cancel threshold boundary changes
Select choice => : (1..19) [19]
7. Enter 17 at the prompt to apply the changes you made to your configuration.

Best Practices

To "turn off" thresholds, configure alarms to 0 or run
fwAlarmsFilterSet(0).
86
Before you complete this step, changes exist in volatile RAM; after this step,
changes move to non-volatile Flash memory.
11 : change threshold alarm level
12 : change changed alarm
13 : change exceeded alarm
14 : change below alarm
15 : change above alarm
16 : change inBetween alarm
17 : apply threshold alarm changes
18 : cancel threshold alarm changes
Fabric Watch Version 3.1.x/4.1.x User Guide