Messages - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Note:
require troubleshooting.

Messages

Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Fabric Watch Version 3.1.x/4.1.x User Guide
An inexplicable fabric reconfiguration may be a transient error and may not
FW-CHANGED, 4, fabricFR000 (Fabric Reconfigure)value has changed.
current value : <value> Reconfig(s). (info)
Explains that the cumulative number of fabric reconfigurations has changed.
Provides the new value.
This is an informational message. Respond to this message as is appropriate
to the particular policy of the end-user installation.
FW-ABOVE, 3, fabricFR000 (Fabric Reconfigure) is above high boundary.
current value : <value> Reconfig(s). (info)
Explains that the total number of fabric reconfigurations has risen above the
high boundary. Provides the new value.
Verify that the cable is properly connected at both ends. Verify that the SFP
has not become faulty.
Note: An inexplicable fabric reconfiguration may be a transient error and may
not require troubleshooting.
FW-BELOW, 3, fabricFR000 (Fabric Reconfigure) is below low boundary.
current value : <value> Reconfig(s). (info)
Explains that the total number of fabric reconfigurations has fallen below
the low boundary. Provides the new value.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
WARNING EXCEEDED, 4, fabricFR000 (Fabric Reconfigure) is exceeded
boundary. current value : <value> Reconfig(s). (info)
Explains that the total number of fabric reconfigurations has risen above or
fallen below the acceptable range. Provides the new value.
Responding to Fabric Watch Messages
143