Best Practices - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Using Fabric Watch with Telnet
Threshold alarm level is set at : Default
Errlog-1, SnmpTrap-2, RapiTrap-8
EmailAlert-16
Valid alarm matrix is 27
Changed
Exceeded
Below
Above
InBetween
1 : change behavior type
2 : change behavior interval
3 : change threshold boundary level
4 : change custom unit
5 : change custom time base
6 : change custom low
7 : change custom high
8 : change custom buffer
9 : apply threshold boundary changes 19 : return to previous page
10 : cancel threshold boundary changes
Select choice => : (1..19) [19]

Best Practices

If default threshold boundaries satisfy your requirements, do not create identical
custom values. Until you create a custom value, it does not appear in the
configuration file. Unnecessary custom values waste space in the configuration
file and waste memory.
64
Default Custom
0
0
3
3
3
0
0
3
3
3
11 : change threshold alarm level
12 : change changed alarm
13 : change exceeded alarm
14 : change below alarm
15 : change above alarm
16 : change inBetween alarm
17 : apply threshold alarm changes
18 : cancel threshold alarm changes
Fabric Watch Version 3.1.x/4.1.x User Guide