Configure Threshold Behaviors - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Using Fabric Watch with Telnet

Configure Threshold Behaviors

Configure threshold behaviors to establish how frequently Fabric Watch reports
events. If you configure triggered behavior, Fabric Watch only registers an event
when a counter crosses a threshold. If you configure continuous behavior, Fabric
Watch registers an event when a counter crosses a threshold and continues to
register an event (at a designated time interval) until the counter returns to an
acceptable value. To configure threshold behaviors, perform the following steps:
1. Enter the fwconfigure command at the CLI prompt and press Enter.
66
admin> fwconfigure
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : EE Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Switch Availability Monitor class
12 : Quit
Select a class => : (1..12) [12]
Fabric Watch Version 3.1.x/4.1.x User Guide