Sfp State Changes Area Messages; Probable Cause; Recommended Action; Messages - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Responding to Fabric Watch Messages

SFP State Changes Area Messages

Probable Cause

These messages occur when the SFP state changes, such as when they are inserted
or removed.

Recommended Action

All SFP State Changes area messages are informational. Respond to this message
as is appropriate to the particular policy of the end-user installation.

Messages

Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
150
FW-CHANGED, 4, fabricSS<element index>) (Fabric SFP change
<element index>) value has changed. current value : <value> Change(s).
(info)
Explains that the status of an SFP has changed. Provides the new value.
All SFP State Changes area messages are informational. Respond to this
message as is appropriate to the particular policy of the end-user installation.
FW-ABOVE, 3, fabricSS<element index>) (Fabric SFP change <element
index>) is above high boundary. current value : <value> Change(s). (info)
Explains that the SFP change value has risen above the high boundary.
Provides the new value.
All SFP State Changes area messages are informational. Respond to this
message as is appropriate to the particular policy of the end-user installation.
FW-BELOW, 3, fabricSS<element index>) (Fabric SFP change <element
index>) is below low boundary. current value : <value> Change(s). (info)
Explains that the SFP change value has fallen below the low boundary.
Provides the new value.
All SFP State Changes area messages are informational. Respond to this
message as is appropriate to the particular policy of the end-user installation.
WARNING EXCEEDED, 4, fabricSS<element index>) (Fabric SFP change
<element index>) is exceeded boundary. current value : <value> Change(s).
(info)
Fabric Watch Version 3.1.x/4.1.x User Guide