Domain Id Area Messages; Probable Cause; Recommended Action; Messages - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Responding to Fabric Watch Messages
Troubleshooting
Message
Description
Troubleshooting

Domain ID Area Messages

Probable Cause

Domain ID changes occur when there is a conflict of domain IDs in a single fabric
and the principal switch has to assign another domain ID to the switch.

Recommended Action

All Domain ID area messages are informational. Respond to this message as is
appropriate to the particular policy of the end-user installation.

Messages

Message
Description
Troubleshooting
Message
Description
Troubleshooting
144
This is an informational message. Respond to this message as is appropriate
to the particular policy of the end-user installation.
FW-INBETWEEN, 3, fabricFR000 (Fabric Reconfigure) is between high &
low boundaries. current value : <value> Reconfig(s). (info)
Explains that the total number of fabric reconfigurations has changed from a
value outside of the acceptable range to a value within the acceptable range.
Provides the new value.
This is an informational message. Respond to this message as is appropriate
to the particular policy of the end-user installation.
FW-CHANGED, 4, fabricDI000 (Fabric Domain ID) value has changed.
current value : <value> DID Change(s). (info)
Explains that the total number of Domain ID changes has changed. Provides
the new value.
All Domain ID messages are informational. Respond to this message as is
appropriate to the particular policy of the end-user installation.
FW-ABOVE, 3, fabricDI000 (Fabric Domain ID) is above high boundary.
current value : <value> DID Change(s). (info)
Explains that the total number of Domain ID changes has risen above the
high boundary. Provides the new value.
All Domain ID messages are informational. Respond to this message as is
appropriate to the particular policy of the end-user installation.
Fabric Watch Version 3.1.x/4.1.x User Guide