Rising/Falling Threshold - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Rising/Falling Threshold

A rising/falling threshold consists of only one boundary. In a rising/falling
threshold, all values to one side of the boundary qualify as the normal zone, and
counter values that exceed the boundary generate events.
Figure 2
boundary, and values above the boundary exceed the threshold. In the figure, an
event registers when, at five seconds, the counter exceeds the boundary.
Figure 2: Rising/Falling Threshold
This particular figure presents a rising/falling threshold with a high boundary.
Rising falling thresholds can also consist of low boundaries, where the normal
zone appears above the boundary, and events register when counters dip below the
boundary.
To configure a rising/falling threshold, you must:
Fabric Watch Version 3.1.x/4.1.x User Guide
presents a rising/falling threshold where the normal zone exists below the
Configure a high boundary or a low boundary.
Configure an above alarm (for thresholds with high boundaries) or a below
alarm (for thresholds with a low boundary).
Using Fabric Watch
49