Using The Fru Class - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Using the FRU Class

You can configure the FRU class at the CLI and with Web Tools in much the same
way that you configure other Fabric Watch classes. Web Tools presents the FRU
class in the Fabric View window with all other classes. To configure the FRU class
with Web Tools, refer to
Perform the following steps to configure the FRU class with the CLI:
1. Enter the fwFruCfg command at the prompt and press Enter.
Example
Fabric Watch Version 3.1.x/4.1.x User Guide
"Using Fabric Watch with Web
admin> fwfrucfg
1 : Slot
2 : Power Supply
3 : Fan
4 : WWN
5 : Configure All
6 : Set All to Default
7 : Quit
Select an item => : (1..7) [7]
The FRU Class
Tools" on page 87.
169