HP StorageWorks MSA 2/8 - SAN Switch User Manual page 191

Example
Fabric Watch Version 3.1.x/4.1.x User Guide
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
----------------------------------
FaultyPorts
MissingSFPs
PowerSupplies
Temperatures
Fans
PortStatus
ISLStatus
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the prompt
is (0..0),
** the policy parameter is NOT applicable to the switch.
** Simply hit the Return key.
The minimum number of
FaultyPorts contributing to
FaultyPorts contributing to
MissingSFPs contributing to
Down Marginal
2 1
0 0
2 1
2 1
2 1
0 0
0 0
DOWN status: (0..32) [2] 3
MARGINAL status: (0..32) [1] 2
DOWN status: (0..32) [0]
Fabric Watch Telnet Commands
191