Messages - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Responding to Fabric Watch Messages

Messages

Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
116
FW-CHANGED, 4, envFan<element index> (Env Fan <element index>)
value has changed, current value: <value> RPM. (info)
Explains that the speed of the fan has changed to a new value. Provides the
new value.
This is an informational message. Respond to this message as is appropriate
to the particular policy of the end-user installation. To prevent recurring
messages, disable the changed alarm for this threshold.
FW-EXCEEDED, 3, envFan<element index> (Env Fan <element index>)
exceeded boundary, current value: <value> RPM. (info)
Explains that the speed of the fan has risen to an unacceptably high value or
fallen to an unacceptably low value. Provides the new value.
Consistently abnormal fan speeds generally indicate that you must replace
the fan.
FW-BELOW, 3, envFan<element index> (Env Fan <element index>) is
below low boundary, current value: <value> RPM. (normal)
Explains that the speed of the fan has fallen to a value below the low
boundary. Provides the new value.
Consistently abnormal fan speeds generally indicate that you must replace
the fan.
FW-ABOVE, 3, envFan<element index> (Env Fan <element index>) is
above high boundary, current value: <value> RPM. (faulty)
Explains that the speed of the fan has risen to a value above the high
boundary. Provides the new value.
Consistently abnormal fan speeds generally indicate that you must replace
the fan.
FW-INBETWEEN, 3, envFan<element index> (Env Fan <element index>)
is between high and low boundaries, current value: <value> RPM. (normal)
Explains that the speed of the fan has changed from a value outside of the
acceptable range to a value within the acceptable range. Provides the new
value.
Fabric Watch Version 3.1.x/4.1.x User Guide