Figure 51
Canvas of eight performance monitoring graphs
Launching the Performance Monitor module
Use the following procedure to launch the Advanced Web Tools Performance Monitor module.
1.
Select a switch from the Fabric Tree.
The selected switch appears in the Switch View.
2.
Click the Perf button on the Switch View.
The Performance Monitor module is displayed.
Creating a basic Performance Monitor graph
Use the following procedure to create the basic Performance Monitor graphs listed in
page 130.
1.
Launch the Performance Monitor module as described on
2.
Select Performance Graphs > Basic Monitoring >
Depending on the type of graph you select, you might be prompted to select a slot or port for which to
create a graph (see
132 Monitoring performance
Figure
52).
page
132.
Graph Type
.
Table 12
on