HP StorageWorks MSA 2/8 - SAN Switch User Manual page 139

Hp storageworks fabric watch v3.1.x/4.1.x user guide (aa-rtsgc-te, june 2003)
Hide thumbs Also See for StorageWorks MSA 2/8 - SAN Switch:
Table of Contents

Advertisement

Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Troubleshooting
Message
Description
Fabric Watch Version 3.1.x/4.1.x User Guide
This is an informational message. Respond to this message as is appropriate
to the particular policy of the end-user installation.
FW-ABOVE, 3, portState<element index> (Port State Changes<element
index>) is above high boundary. current value : <value> Change(s)/minute.
(faulty)
Explains that the number of times per minute that the port has switched to a
different port-type has risen above the high boundary. Provides the new
value.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
FW-BELOW, 3, portState<element index> (Port State Changes<element
index>) is below low boundary. current value : <value> Change(s)/minute.
(normal)
Explains that the number of times per minute that the port has switched to a
different port-type has fallen below the low boundary. Provides the new
value.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
WARNING EXCEEDED, 4, portState<element index> (Port State
Changes<element index>) is exceeded boundary. current value : <value>
Change(s)/minute. (info)
Explains that the number of times per minute that the port has switched to a
different port-type has risen above or fallen below the acceptable range.
Provides the new value.
This message is informational. Respond to this message as is appropriate to
the particular policy of the end-user installation.
FW-INBETWEEN, 3, portState<element index> (Port State
Changes<element index>) is between high & low boundaries. current value
: <value> Change(s)/minute. ()
Explains that the number of times per minute that the port has switched to a
different port-type has changed from a value outside of the acceptable range
to a value within the acceptable range. Provides the new value.
Responding to Fabric Watch Messages
139

Advertisement

Table of Contents
loading

Table of Contents