HP StorageWorks MSA 2/8 - SAN Switch User Manual page 71

5. Enter 1 and press Enter to configure the behavior type.
1 : change behavior type
2 : change behavior interval
3 : change threshold boundary level
4 : change custom unit
5 : change custom time base
6 : change custom low
7 : change custom high
8 : change custom buffer
9 : apply threshold boundary changes 19 : return to previous page
10 : cancel threshold boundary changes
Select choice => : (1..19) [19] 1
Select threshold index => : (1..2) [1]
6. Enter the index number of the threshold that you want to configure and press
Fabric Watch Version 3.1.x/4.1.x User Guide
Example
Enter.
Example
Select threshold index => : (1..2) [1] 2
1 : triggered
2 : continuous
Enter behavior type => : (1..2) [1]
Using Fabric Watch with Telnet
11 : change threshold alarm level
12 : change changed alarm
13 : change exceeded alarm
14 : change below alarm
15 : change above alarm
16 : change inBetween alarm
17 : apply threshold alarm changes
18 : cancel threshold alarm changes
71