Using Fabric Watch with SNMP
3. In your browser, navigate to the swFwSystem directory.
Example
4. Log on to your switch.
5. Enter the atgcfgset command to configure the switch to communicate
Example
100
with your SNMP server. Configure fields as appropriate for your SNMP
requirements. Your switch commits the configuration.
sqa2174:admin> agtcfgset
Customizing MIB-II system variables ...
At each prompt, do one of the followings:
o <Return> to accept current value,
o enter the appropriate new value,
o <Control-D> to skip the rest of configuration, or
o <Control-C> to cancel any change.
Fabric Watch Version 3.1.x/4.1.x User Guide