Sam -Class Areas - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Table 9: Security-Class Areas (Continued)
invalid timestamps
invalid signatures
invalid certificates
SLAP failures
SLAP bad packets
TS out of sync
no FCS
incompatible security DB
illegal command
Table 10
each area.
Table 10: SAM -Class Areas
total downtime
total uptime
duration of occurrences
frequency of occurrences
Fabric Watch Version 3.1.x/4.1.x User Guide
Area
If a time interval becomes to great from the time a
packet is sent to the time it is received, the timestamp of
the packet becomes invalid and the switch rejects the
packet.
If a switch cannot verify the signature of a packet, the
switch rejects the packet and the signature becomes
invalid.
The Primary FCS switch sends a certificate to all
switches in the secure fabric before it sends
configuration data. Receiving switches only accept
packets with the correct certificate. Any other
certificates qualify as invalid and represent an
attempted security breach.
A Switch Link Authentication Protocol (SLAP) failure
occurs when packets try to pass from an unsecure
switch to a secure fabric.
A Time Server Out of Synchronization error has been
detected.
This area indicates that the switch has lost contact with
the Primary FCS.
This area tracks when commands permitted only to the
primary FCS has been executed on another switch.
lists Fabric Watch areas in the SAM class and provides a description of
Area
Indicates the total downtime of each F_Port and E_Port.
Indicates the total uptime of each F_Port and E_Port.
Indicates the amount of time a port stays down
Indicates how frequently a port goes down.
Using Fabric Watch
Description
Description
39