4.10 Display assembly
4
Replacement Procedures
4.10 Display assembly
Removing the Display assembly
To remove the display assembly, follow the steps below and refer to Figure 4-17 to 4-20.
1. Turn the computer face down and remove the following screws on the bottom.
• M2.5×4B
• M2.5×6B
• M2.5×16B
• M2×4S
6
TECRA M5 Maintenance Manual (960-542)
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
S-THIN HEAD screw
4B
6
16
6
6
16
16
Figure 4-17 Removing the display assembly (1)
4 Replacement Procedures
×1 ("4B" in the figure below)
×6 ("6" in the figure below)
×7 ("16" in the figure below)
×1 ("4S" in the figure below)
16
16
4S
16
[CONFIDENTIAL]
6
16
6
4-29