4.11 MDC (Modem Daughter Card)
Installing the MDC
To install the MDC, follow the steps below and refer to Figure 4-21.
1. Connect the modem cable to the connector on the MDC.
2. Set the MDC and press it carefully to connect it to the connector CN3010 on the
system board. Be careful not to damage the MDC and connector.
3. Secure the MDC with the following screws.
• M2×4S
TECRA M5 Maintenance Manual (960-542)
×2
BIND screw
[CONFIDENTIAL]
4 Replacement Procedures
4-35