Toshiba Tecra M5 Maintenance Manual page 277

4.14 Sound board
Installing the Sound board
To install the sound board, follow the steps below and refer to Figure 4-25 to 4-26.
1. Install the sound board from the right side on the base assembly.
2. Connect the USB cable to the connector PJ9511 on the sound board and the
connector CN9501 on the system board.
3. Connect the sound board cable from the connector CN9510 on the sound board and
the connector CN9500 on the system board.
TECRA M5 Maintenance Manual (960-542)
USB cable
CN9501
CN9500
Figure 4-26 Removing the cables
[CONFIDENTIAL]
4 Replacement Procedures
Sound board cable
4-41