Toshiba Tecra M5 Maintenance Manual page 174

3 Tests and Diagnostics
Subtest 07 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
(1)
(2)
(3)
(4)
Confirm corresponding LED lights properly.
Press Enter and following message appears in the display.
Check [PowerSW-LED]= Green
Check if the Power Switch LED lights in the following order.
(Green → Orange → Blue → OFF)
Press any key and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED= Green/Orange
Check if the each LED lights in the same color shown in the display
(Message switches Green ↔ Orange).
Press Enter and return to the ONLY ONE TEST menu.
Subtest 08 PC-Card Device Lock
NOTE: PC card wraparound test is not tested on this subtest.
This subtest checks the device lock function. This test needs a PC card, not a
PC wraparound card. Before this test, inset a PC card.
Turn on the computer and select 8 from the only one test menu.
When it passes the test, following message appears.
Device Lock TEST OK
When a PC card is not inserted or a PC wraparound card is inserted, following
message appears.
PC Card Not Inserted
When it does not pass the test, following message appears.
Device Lock TEST NG
3-44
Press [Caps Lock ] key ! ...Caps
Press [Fn + F10
Press [Fn + F11
Slide [BT/W-LAN switch L&R]!
[CONFIDENTIAL]
3.20 ONLY ONE TEST
] key ! ...Arrow
] key ! ...Num
TECRA M5 Maintenance Manual (960-542)
(on/off)
(on/off)
(on/off)
(on/off)