Toshiba Tecra M5 Maintenance Manual page 251

4.5 HDD
4. Place the HDD assembly on a flat surface, and remove the following screws.
• M3×4S
5. Separate the HDD and HDD Holder.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4S FLAT HEAD
Figure 4-7 Separating the HDD and HDD holder
TECRA M5 Maintenance Manual (960-542)
FLAT HEAD screw
HDD
4 Replacement Procedures
×4
M3×4S FLAT HEAD
HDD Holder
[CONFIDENTIAL] 4-15