Display Assembly - Toshiba Satellite L730 Maintenance Manual

Chapter 4 Replacement Procedures
file

4.10 Display Assembly

Removing the Display Assembly
The following describes the procedure for removing the Display Assembly.
1. Close the display and turn the computer upside down.
2. Remove the battery pack (See Figure 4-2-1)
3. Disassemble TOP Cover Assembly.
4. Pull out the LCD cables from the guide of system board.
Figure 4-10-1 Remove the LCD cable from system board
5. Remove the DC-IN connector from the base assembly.
Satellite L730/Satellite 735/Satellite Pro 730 Maintenance Manual (960-Q08)
37