4.12 Wireless LAN card
2. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
3. Remove the following screw securing the wireless LAN card.
• M2×4S
4. Disconnect the wireless LAN card from the connector CN 2600 on the system board.
Be careful not to damage the connector.
CN2600
TECRA M5 Maintenance Manual (960-542)
×1
BIND screw
Figure 4-23 Removing the wireless LAN card
4 Replacement Procedures
Wireless LAN card
[CONFIDENTIAL]
M2x4S BIND
4-37