Sw Membrane - Toshiba Tecra M5 Maintenance Manual

4.9 SW membrane

4.9 SW membrane
Removing the SW membrane
To remove the SW membrane, follow the steps below and refer to Figure 4-16.
1. Disconnect the SW membrane cable from the connector CN3250 on the system
board.
2. Push the latch A in the direction in the following figure and lift up the flexible cable
portion of SW membrane from the slot.
3. Push down the latch B and slide the SW membrane in the direction in the figure.
4. Remove the SW membrane.
Portion A
Latch A
Installing the SW membrane
To install the SW membrane, follow the steps below and refer to Figure 4-16.
1. Place the SW membrane in the slot.
TECRA M5 Maintenance Manual (960-542)
Flexible cable
Latch B
Figure 4-16 Removing the SW membrane
[CONFIDENTIAL]
4 Replacement Procedures
SW membrane
SW membrane cable
CN3250
4-27