H/W (Hardware) Initial Information Setting Tool; Heatrun Test Program - Toshiba Tecra M5 Maintenance Manual

3.1 The Diagnostic Test

3.1.2 H/W (Hardware) initial information setting tool

The H/W initial information setting tool consists of the following programs.
Initial configuration
DMI information save
DMI information recovery
System configuration display
E2PROM test (MAC/GUID/DMI)
You will need the following equipment to perform some of the programs.
The Diagnostics Disk (Main T&D)

3.1.3 Heatrun test program

The heatrun test starts automatically after the selection.
You will need the following equipment to perform this program.
The Diagnostics Disk (Main T&D)
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL]
3 Tests and Diagnostics
3-3