Toshiba Tecra M5 Maintenance Manual page 199

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program
Message
Invalid BD_ADDR (all 00)
Invalid BD_ADDR (all FF)
Invalid BD_ADDR (bit0=1)
Invalid BD_ADDR (bit1=1)
Invalid BD_ADDR (define in the file)
If the machine detects a malfunction, it indicates the error code as shown
below.
The error code begins with the least significant digit.
Error code
Table 3-6 Error code for Bluetooth test (BD_ADDR) (1/2)
Error code
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0a
0x0b
0x0c
0x0d
0x0e
0x0f
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1a
TECRA M5 Maintenance Manual (960-542)
Table 3-5 Error message
Unknown HCI Command.
No Connection.
Hardware Failure.
Page Timeout.
Authentication Failure.
Key Missing.
Memory Full.
Connection Timeout.
Max Number Of Connections.
Max Number Of SCO Connections To A Device.
ACL Connection already exists.
Command Disallowed.
Host Rejected due to limited resources.
Host Rejected due to security reasons.
Host Rejected due to remote device is only a personal device.
Host Timeout.
Unsupported Feature or Parameter Value.
Invalid HCI Command Parameters.
Other End Terminated Connection: Used Ended Connection.
Other End Terminated Connection: Low Resources.
Other End Terminated Connection: About to Power Off.
Connection Terminated by Local Host.
Repeated Attempts.
Paring Not Allowed.
Unknown LMP PDU.
Unsupported Remote Feature.
Contents
0x000000000000
0xFFFFFFFFFFFF
bit40=1b
bit41=1b
Defined BD_ADDR
Meaning
[CONFIDENTIAL]
3 Tests and Diagnostics
3-69