Toshiba Tecra M5 Maintenance Manual page 311

4.28 Hinge
7. Remove the LCD cable holder B while releasing the latch.
8. Remove the following screw and earth plate.
• M2×4B
9. Remove the following screw securing the hinge (left).
• M2.5×4S
10. Remove the hinge (left) while sliding and turning it.
11. Pull out the LCD cable from the hole.
Earth plate
TECRA M5 Maintenance Manual (960-542)
S-THIN HEAD screw
Tapping screw
M2.×4B S-THIN HEAD
Figure 4-52 Removing the hinge
[CONFIDENTIAL]
4 Replacement Procedures
×1
×1
M2.5×4S Tapping
Hinge (left)
LCD cable holder B
LCD cable
4-75