Toshiba Tecra M5 Maintenance Manual page 303

4.25 Touch pad
Installing the Touch pad
To install the touch pad, follow the steps below and refer to Figure 4-47.
1. Connect the touch pad cable to the connector on the touch pad and stick the glass
tape.
2. Install the touch pad assembly to the slot.
3. Install touch pad cover while engaging the latches.
4. Secure the touch pad assembly with the following screws.
• M2.5×4B
TECRA M5 Maintenance Manual (960-542)
FLAT HEAD screw
[CONFIDENTIAL]
4 Replacement Procedures
×2
4-67