Toshiba Tecra M5 Maintenance Manual page 289

4.19 Fan
Installing the Fan
To install the fan, follow the steps below and refer to Figure 4-35.
1. Install the fan to the slot.
2. Connect the fan cable to the connector CN8771 on the system board.
3. Secure the fan cable with the glass tape.
4. Secure the fan with the following screws.
• M2.5×4B
TECRA M5 Maintenance Manual (960-542)
FLAT HEAD screw
[CONFIDENTIAL]
4 Replacement Procedures
×2
4-53