Toshiba Tecra M5 Maintenance Manual page 260

4 Replacement Procedures
5. Lift the keyboard upward a little and turn it face down on the palm rest.
NOTE: The bottom of the key board is stuck on the middle frame with double-sided tapes
at following two points.
6. Remove the following screws and keyboard support plate.
• M2.5×16B
• M2.5×4B
M2.5×4B FLAT HEAD
Figure 4-14 Removing the keyboard support plate
4-24
FLAT HEAD screw
FLAT HEAD screw
M2.5×16B FLAT HEAD
[CONFIDENTIAL]
Double-sided tape
.
×1
×1
Keyboard support plate
TECRA M5 Maintenance Manual (960-542)
4.8 Keyboard