Toshiba Tecra M5 Maintenance Manual page 279

4.15 RTC battery
Removing the RTC battery
To remove the RTC battery, follow the steps below and refer to Figure 4-27.
1. Disconnect the RTC battery cable from the connector CN9390 on the system board.
2. Open the insulator and remove the RTC battery.
Installing the RTC battery
To install the RTC battery, follow the steps below and refer to Figure 4-27.
1. Set the RTC battery in place and wrap it with the insulator.
2. Connect the RTC battery cable to the connector CN9390 on the system board.
TECRA M5 Maintenance Manual (960-542)
RTC battery cable
CN9390
Figure 4-27 Removing the RTC battery
4 Replacement Procedures
RTC battery
[CONFIDENTIAL]
Insulator
4-43