Touch Pad - Toshiba Tecra M5 Maintenance Manual

4 Replacement Procedures

4.25 Touch pad

Removing the Touch pad
To removing the touch pad, follow the steps below and refer to Figure 4-47.
1. Remove the following screws securing the touch pad assembly from the back.
• M2.5×4B
2. Remove the touch pad cover while releasing the latches.
3. Remove the touch pad assembly from the slot.
4. Turn the touch pad face down and peel off the glass tape on the connector of touch
pad cable.
5. Disconnect the touch pad cable from the connector on the touch pad.
4-66
FLAT HEAD screw
Glass tape
Touch pad cable
M2.5x4B FLAT HEAD
Figure 4-47 Removing the touch pad assembly
[CONFIDENTIAL]
×2
Touch pad cover
Latches
TECRA M5 Maintenance Manual (960-542)
4.25 Touch pad
Touch pad
assembly