Membrane Switch Removal; Speakers Removal - Toshiba Satellite Pro 6100 Series Quick Start Manual

FIELD REPLACEABLE UNIT DOCUMENTATION
SYSTEM BOARD REMOVAL
SDcable Sound cable
3. Disconnect following cables from the system board:
-Sound interface cable from PJ302
-SD interface cable from PJ365
-DC-IN jack harness from PJ8800
4. Remove four M2.5x4 black flat head screws securing
the system board.
5. Lift out the system board.

MEMBRANE SWITCH REMOVAL

M2.5x4 black flat head screws
1. Remove three M2.5x4 black flat head screws
securing the membrane switch.
2. Lift out the membrane switch assembly.
Satellite Pro
6100 Series
PJ8800
DC-IN jack
harness
M2.5x4 black flat head screws
Membrane
switch assy
TOSHIBA
Tough Enough for Today's World.
TM
System
board
Heat sink
Plate assy
6. Remove the video chip heat sink plate assembly
from the system board.
NOTE: When re-installing the heat sink plate assembly,
make sure that a 0.2g silicone grease is applied
to the video controller IC(IC11).

SPEAKERS REMOVAL

Left and right
speakers
M2.5x4 black flat head screws
1. Remove two M2.5x4 black flat head screws
securing the left and right speakers.