3.1 The Diagnostic Test
3.1.2 H/W (Hardware) initial information setting tool
The H/W initial information setting tool consists of the following programs.
You will need the following equipment to perform some of the programs.
3.1.3 Heatrun test program
The heatrun test starts automatically after the selection.
You will need the following equipment to perform this program.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from
www.Manualslib.com
Initial configuration
DMI information save
DMI information recovery
System configuration display
E2PROM test (MAC/GUID/DMI)
The Diagnostics Disk (Main T&D)
The Diagnostics Disk (Main T&D)
manuals search engine
3 Tests and Diagnostics
[CONFIDENTIAL]
3-3