Checking The Size Of A Loaded Original; G Manually Setting The Scanning Size; Manually Setting The Scanning Size - Sharp AR-FX10 Operation Manual

CHECKING THE SIZE OF A LOADED ORIGINAL

When a standard-size* original is placed, the original size is automatically detected
(automatic original detection function) and displayed in the top half of the
[ORIGINAL] key. Check the key to make sure that the original size has been
correctly detected.
: [AUTO] appears when the automatic original detection function is operating.
1
: Displays the original size.
2
If a non-standard size original is placed or if you wish to change the scanning
size, follow the steps below to manually set the original scanning size.
NOTE
* Standard sizes that can be detected are as follows:
A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard
size original is loaded (including special sizes), the closest standard size may be displayed, or the original size
may not appear at all.

MANUALLY SETTING THE SCANNING SIZE

If you load an original that is not a standard size (such as an INCH size), or if the size is not detected correctly, you
must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after loading the
document in the document feeder tray or on the document glass (see the previous page).
1 Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO A4
ORIGINAL
2 Touch the [MANUAL] key.
ORIGINAL SIZE
O MANUAL
2-SIDED
IDED
BOOKLET
3 Touch the desired original size key.
SPEAKER REDIAL
ORIGINAL SIZE OK
OK
AUTO MANUAL
A5 A5R B5 B5R
A4 A4R B4 A3
AB INCH
SPEAKER REDIAL
ORIGINAL SIZE OK
OK
MANUAL
AUTO
A5 A5R B5 B5R
A4 B4 A3
A4R
AB INCH
1-8
If the address directory
screen appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-5).
The sizes that can be
selected are displayed.
[AUTO] is no longer
highlighted. [MANUAL]
and the original size key
you touched are
highlighted.
To select an inch size,
touch the [INCH] tab.
SPEAKER REDIAL
ORIGINAL SIZE OK
AUTO MANUAL OK
1 / 1 / 1 / 1 / 1 / 1 /
5 X8 5 X8 R 8 X11 8 X11R
2 2 2 2 2 2
8 X14 1 / 11X17
2
INCH
AB
4 Touch the outer [OK] key.
OK
UAL
OK
8 X11 1 / 8 X11R 1 /
2 2
The selected size appears in the top half of
5
the [ORIGINAL] key.
STANDARD
RESOLUTION
8 X11 1 /
2
ORIGINAL
STANDARD
RESOLUTION
AUTO A4
ORIGINAL
Touch the appropriate
inch original size key.
The selected key is
highlighted. To return to
the AB original size
palette, touch the [AB]
tab.
You will return to the
initial screen. (Touching
the inner [OK] key in the
step above returns you
to step 2.)