G Editing And Deleting One-Touch Keys; Editing And Deleting One-Touch Keys - Sharp AR-FX10 Operation Manual

EDITING AND DELETING ONE-TOUCH KEYS

If you wish to delete a one-touch key or change the fax number, name, or other information programmed in a one-
touch key, follow steps 1 through 3 on page 6-2 and then perform the following procedure.
1 Touch the [AMEND/DELETE] key.
AMEND/DELETE
2 Touch the one-touch key that you wish to
edit or delete.
DIRECT ADDRESS / AMEND/DELETE
SELECT ADDRESS TO AMEND/DELETE.
SHARP CORPORATION CORPO.TPS
SHARP GROUP D
E F
G H
FREQUENT USE ABCD EFGHI JKLMN
G To edit a one-touch key, follow steps 3 and 4.
G To delete a one-touch key, follow steps 5 and 6.
G When you have finished editing or deleting, touch the
[EXIT] key.
3 Touch the key corresponding to the
information you wish to change (change
the information in the same way as you
stored the information on page 6-3).
DIRECT ADDRESS / AMEND/DELETE
NAME SHARP CORPORATION
INDEX USER 3 FAX No.
KEY NAME SHARP CORPORATION
NOTE
If you cannot edit or delete a one-touch key
If you attempt to edit or delete a one-touch key in the following situations, a warning message will appear and
editing/deletion will not be possible.
G The one-touch key you wish to edit or delete is currently being used for transmission or is used in a currently
stored transmission job (including a timer transmission). (See "CANCELLING A FAX TRANSMISSION" on page
2-6.)
G The one-touch key is included in a group key. (See "EDITING AND DELETING GROUP KEYS" on page 6-7.)
G The one-touch key is included in a group of end receiving machines for an F-code relay broadcast operation.
(See "EDITING AND DELETING A MEMORY BOX" on page 6-14.)
G The one-touch key is included in a program. (See "EDITING AND DELETING PROGRAMS" on page 6-8.)
If the key is being used for a transmission currently in progress or a stored transmission, cancel the transmission
or wait until it is completed and then change or delete the key. If the key is included in a group, delete the key from
the group and then change or delete it.
STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS
EXIT
PROGRAM
OPQRST UVWXYZ
ABC GROUP
DELETE EXIT
INITIAL
S
0666211221/3456/987654
MODE 33.6 kbps/NONE
4 Make sure that your changes are correct,
and then touch the [EXIT] key.
EXIT
DELETE
INITIAL S
Touch the [DELETE] key.
5
DELETE EXIT
INITIAL
S
6 Touch the [YES] key.
DELETE THE ADDRESS?
SHARP CORPORATION
NO YES
You will return to the
screen of step 2.
If you wish to change
another one-touch key,
repeat steps 2 through
4.
You will return to the
screen of step 2.
If you wish to delete
another one-touch key,
repeat steps 2, 5, and 6.
6-5
6