G Printing Out Settings; Printing Out Settings - Sharp AR-FX10 Operation Manual

KEY OPERATOR PROGRAMS

PRINTING OUT SETTINGS

Settings established with the key operator programs can be verified by printing them out.
1 Press the [CUSTOM SETTINGS] key.
Touch the [KEY OPERATOR PROGRAMS]
2
key.
DISPLAY
LIST PRIN
CONTRAST
ADDRESS
RECEIVE MO
CONTROL
KEY OPERATOR PROGRAMS
3 Use the numeric keys to enter the five-digit
key operator code number.
KEY OPERATOR CODE
8-12
For the factory default
setting for the key
operator code number,
see page 3 of the key
operator's guide.
4 Touch the [LIST PRINT] key.
COPY SETTINGS
SE
KEY
LIST PRINT
CODE
5 Touch the [ALL
PROGRAMS LIST] key.
OPERATOR PROGRAMS
T PRINT
ALL KEY OPERATOR PROGRAMS LIST
SENDER LIST(FAX)
IMAGE SENDING ACTIVITY REPORT ANTI JUNK FAX
NOTES
G In the screen of Step 5, you can touch the
[SENDER LIST (FAX)] key to print the Sender List.
This allows you to check the name and fax number
you programmed in "Own number and name set"
on page 8-5.
G In the screen of step 5, you can touch the [IMAGE
SENDING ACTIVITY REPORT] key to print an
activity report (transmissions and receptions).
Print this list when you wish to check the activity
record. (see "Activity report print select setting" on
page 8-6)
G In the screen of step 5, you can touch the [ANTI
JUNK FAX NUMBER LIST] key to print the anti
junk fax number list.
This allows you to check the fax numbers that
have been programmed in "Anti junk fax setting"
on page 8-10.
PR
KEY OPERATOR
"PROCESSING PRINT
DATA." appears in the
message screen and
printing begins.
To cancel printing, touch
the [CANCEL] key.