To Use This Product Correctly As Afacsimile - Sharp AR-FX10 Operation Manual

TO USE THIS PRODUCT CORRECTLY AS
A FACSIMILE
Several points must be kept in mind when using this product as a facsimile.
Please note the following:
I I I I Line connection
Use the telephone cable supplied to connect the
machine to a telephone line. Insert the end of the line
cord with the core into the LINE socket on the
machine as shown. Insert the other end into the
telephone line socket.
In some countries, an adapter is required to connect the
telephone line cable to the wall telephone socket, as
shown in the illustration.
I I I I Fax power switch
When using the machine, be sure to keep the fax power switch turned
on at all times. The fax power switch must be turned on to receive
faxes at night or send timer transmission faxes at night.
I I I I Settings and programming
Information about settings and programming that are required before the fax functionality can be used is located
in "POINTS TO CHECK AND PROGRAM AFTER INSTALLATION" on page 1-2 of this manual. Please read this
section and perform the required settings and programming.
I I I I Lithium battery
A lithium battery inside the machine keeps key operator program settings for the fax function in memory.
G When the battery dies, settings and programmed information will be lost. Be sure to keep a written record of
the settings and programmed information. (Refer to page 6-14.)
G The life of the lithium battery is approximately 5 years if the main switch and fax power switch are kept
continually off.
I I I I Other information
G If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information
will be retained in memory even if the power cord is unplugged.
0-4
Line socket
Core
For United
Kingdom
For Australia
For New Zealand
ON
OFF
Wall socket
Adapter
Fax power switch